FASTENERS
Brand Name: Grip-Rite
Length: 8 in.
Nail Type: Spike
Finish: Bright
Material: Steel
Product Type: Nail
Head Type: Flat Head
Container Size: 50 lb
Head Diameter: 3/4 in.
Color: Silver
Number in Package: 165 pk
Indoor or Outdoor: Outdoor
Point Type: Diamond
Packaging Type: Boxed
Shank Type: Smooth Shank
Shank Diameter: 3/8 in.
Deck Plus exterior deck screws offer a comprehensive finishing fastener solution, including exterior wood, composite, and trim uses. Deck Plus requires no pre-drilling and is perfect for all of your decking, fencing and exterior wood project needs.
Self-drilling point - together, coarse screw (threads and a self-drilling point design eliminate the need for a pilot hole
Flat-head style - sits flush with material
Green epoxy coating - 4-layer coating provides superior rust and corrosion protection
Star drive style - also known as torx, this drive is designed to reduce slippage and camout when tightening the screw
Safe for treated lumber - recommended for use with ACQ, CA, and CCA treated lumber
National Hardware Screw Hooks 6 in. L 20
*Finish: Zinc-Plated
*Color: Silver
*Material: Steel
*Length: 6 in.
*Product Type: Screw Hook
*Capacity: 200 lb.
*Number in Package: 1 pk
*Installation Type: Screw-In
*Hardware Included: No
*Projection: 2 in.
*Packaging Type: Bulk
(100) Grade 5 Hex Head 3/8-16 x 1 Serrated Flange Bolts Cap Screws Zinc Material0Alloy Steel
Thread Size03/8"-16
Exterior Finish0Zinc
Manufacturer Grade0Grade 5
Head Style0Flanged Hex
Rubber Grommets 1-3/4" ID, 1/2" Groove Width , 2-2/5" OD
Protect wires from chafing against drilled holes.
Grommets have an inside diameter of 1 3/4".
Black in color.
REACH, RoHS and Prop65 Compliant
NOTE: Groove diameter is the size of hole needed to snap a grommet into for the best fit.
Quantity: 50
Finish: Zinc Chromate
Head Style: Hex Washer
Hex Size: 9/16 in.
Length: 1 in.
Screw Size: 3/8 in.-16
Thread Type: Type 'F' Thread Cutting
Inside Diameter: 3/4"
Groove Width: 1/4"
Groove Diameter: 1-1/4"
Outside Diameter: 1-5/8"
Thickness: 7/16"
3/4" ID Rubber Grommets - 1/4" Groove Width - Fits 1-1/4" Panel Holes. Ideal for passing wires through panels without risking damage or abrasion by acting as a protective barrier, extending the lifespan of your cables and wires.
Wire loop attached through the head and secured over the post at the opposite end. A wire loop at the end of the bent wire slides over the post for easy securing and removal. Similar to a clevis pin but with a wire loop attached to the end.
-Perfect for quick release applications
-Wire loop at the end of the bent wire slides over the post for easy securing and removal
-Style: square
-Size: 5/16 in. x 2-3/4 in.
Wire lock pins are a clevis pin with an attached wire loop that is pulled over the end of the pin. The loop at the end of the bent wire slides over the post for simple securing and removal. Pins are square in shape. Parts are similar to a clevis pin but with a wire loop attached to the end.
Perfect for quick release applications
Wire loop at the end of the bent wire slides over the post for easy securing and removal
Style: square
Size: 3/8 in. x 2-1/2 in.
Height01.6250 in
Effective Length02.5000 in
Effective Length Fraction02-1/2 in
Height Fraction01-5/8 in
Inch or Metric0Inch
Outside Diameter00.2500 in
Outside Diameter Fraction01/4 in
Outside Diameter Maximum00.2480 in
Outside Diameter Minimum00.2430 in
Finish (Pins)0Zinc Clear
Material (Pins)0Low Carbon Steel
Shank Length02.7500 in
Shank Length Fraction02-3/4 in
Type (Snap Pins)0Square Two Wire Snap Pin
Height01.7500 in
Effective Length01.3750 in
Effective Length Fraction01-3/8 in
Height Fraction01-3/4 in
Inch or Metric0Inch
Outside Diameter00.3130 in
Outside Diameter Fraction05/16 in
Outside Diameter Maximum00.3110 in
Outside Diameter Minimum00.3060 in
Finish (Pins)0Zinc Clear
Material (Pins)0Low Carbon Steel
Shank Length01.6250 in
Shank Length Fraction01-5/8 in
Type (Snap Pins)0Round Two Wire Snap Pin
Thread Size:1/2"-13
Finish:PlainGrade
Head Style:Hex
Length:1-3/4"
Material:Stainless Steel
Measurement Type:Inch
Product Type:Hex Cap Screws
Style:Partially Threaded
410 STAINLESS STEEL
#12-14 X 1" PHILLIPS PANHEAD SELF DRILLING SCREW
1000/BX
